Product ID:R-373 RUBBER INSUL. ADHESIVE #373
MSDS Date:01/01/1996
FSC:8040
NIIN:00-841-9773
MSDS Number: CGNHB

RUBATEX CORP SUB OF GREAT AMERICAN INDUSTRIES INC

605 ADAMS ST
BEDFORD, VA 24523
US

Preparer: CAROL N. BUSH

Cage: 82942

RUBATEX CORP SUB OF GREAT AMERICAN INDUSTRIES INC

340 BEDFORD, VA 24523 US

Cage: 82942

TOLUENE (SARA 313) (CERCLA)(VP = 22.0 @ 68F)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 16.0%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NORMAL HEXANE (CERCLA)(SARA 313)(VP = 320.0 @ 100F)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 15.0%

OSHA PEL 500 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ACETONE (SARA 313) (CERCLA)(VP = 186 @ 68F)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 35.0%

OSHA PEL 750 PPM

ACGIH TLV: 750 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CYCLOHEXANE (SARA 313) (CERCLA) (VP = 320.0 @ 100F)

CAS: 110-82-7

RTECS: GU6300000

Fraction By Weight: <0.5%

OSHA PEL 500 PPM

ACGIH TLV: 400 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL PENTANE (VP = 320.0 @ 100F)

CAS: 107-83-5

RTECS: SA2995000

Fraction By Weight: 5.0%

OSHA PEL 500 PPM

ACGIH TLV: 400 PPM

3-METHYL PENTANE (SARA 302) (CERCLA) (VP = 320.0 @ 100F)

CAS: 96-14-0

RTECS: TG0175000

Fraction By Weight: 5.0%

OSHA PEL 500 PPM

ACGIH TLV: 400 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: DIZZY, BREATHING DIFFICULTY,
HEADACHES, UNCOORDINATED. EYE: IRRIT, REDNESS, TEARING, BLURRED
VISION. SKIN: DRY, DEFATING, CRACKS, IRRIT, DERMATITIS. INGEST: GI
IRRIT, VOMITING, NAUSEA, DIARRHEA .
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRIT, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHAL: MOVE TO FRESH AIR. ARTIFICIAL RESPIRATION IF NEEDED.
GET MED AID. EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: WASH
THOROUGHLLY W/SOAP & WATER. GET MED AID. INGEST: DONT INDUCE
VOMITING. CAN CAUSE CHEMICAL PNEUMONITIS EDEMA. GET MED AID.

Flash Point Method:CC
Flash Point:40.0F,4.4C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:RESPIRATORY EQUIPMENT SHOULD BE WORN TO AVOID
INHALATION OF CONCENTRATED VAPORS. WATER SHOULD NOT BE USED EXCEPT
AS FOG TO KEEP NEARBY CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS FLAM LIQ. VAPORS FORM EXPLOSIVE
MIXTURES & AIR BETWEEN UPPER/LOWER EXPLOSIVE LIMITS, CAN BE IGNITED
BY PILOT LIGHTS/FLAME/ELECTRICAL MOTORS/SWITCHES.

Spill Release Procedures:REMOVE IGNITION SOURCES. PROVIDE GOOD
VENTILATION. DIKE SPILL AREA. USE ABSORBENT TO CLEAN UP.

Handling and Storage Precautions:USE NON-SPARKING TOOLS WHEN HANDLING.
AVOID HOT METAL SURFACES. USE IN COOL WELL-VENTILATED AREAS. KEEP
CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM EXCESSIVE HEAT & OPEN FLAMES. NO
SMOKING AROUND MATERIAL. TOOLS USED W/THIS MATERIAL SHOULD BE MADE
OF ALUMINUM, BRASS, COPPER. PLASTIC SHOULD NOT BE USED.

Respiratory Protection:WHEN SPRAYING ADHESIVE, USE NIOSH APPROVED
CARTRIDGE RESPIRATOR/GAS MASK SUITABLE TO KEEP AIRBORNE
MISTS/CONCENTRATIONS BELOW THE TLV/TWA. WHEN USING IN POORLY
VENTILATED AREA USE FRESH AIR SUPPLYING RESPIRATOR OR SCBA.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST SHOULD BE SUITABLE TO KEEP
CONCENTRATIONS BELOW TLV. USE EXPLOSION PROOF EQUIPMENT.
Protective Gloves:IMPERMEABLE CHEMICAL HANDLING GLOVES
Eye Protection:CHEM SAFETY GLASSES/GOGGLES/FACE SHIELD
Other Protective Equipment:USE IMPERMEABLE APRONS & PROTECTIVE CLOTHING
WHENEVER POSSIBLE TO PREVENT SKIN CONTACT. USE HEAD CAPS.
Work Hygienic Practices:EYE WASHES & SAFETY SHOWERS IN WORK PLACES
RECOMMENDED.
Supplemental Safety and Health
NK

Boiling Pt:B.P. Text:132 TO 231F
Vapor Density:>AIR
Spec Gravity:0.8
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NO
Appearance and Odor:BLUE, OFFENSIVE ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERE, EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN, POSSIBLE ACROLEIN.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID MIXTURE, PLACE
INTO METAL CONTAINERS. CONSULT LOCAL, STATE, FEDERAL HAZARDOUS
WASTE REGS BEFORE DISPOSING INTO APPROVED HAZARDOUS WASTE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.